|
 TraceTek Leak Detection
|
Even small leaks in the wrong places cause downtime, disruption, and costly damage.
And the aftermath ties up resources in clean–up and repair. TraceTek technology lets you
detect leaks at their source and pinpoint their location–so you can stop damage before it starts.
TraceTek leak detection systems utilize conductive polymer and electrochemical technologies. Low voltage
is applied to the cable's conductive–polymer–coated sensor wires. Contact with water bridges
the gap between the sensor wires, completing an electrical circuit which activates the alarm. The TraceTek
module measures voltage drop along the cable to signal accurately the location of the leak.
|
|
| What's New?
|
New Product: TT1100–OHP
TraceTek TT1100–OHP sensor cable detects water leaks at any point along the cable length. TT1100–OHP is supplied with an absorptive synthetic fiber braid designed to wick water along the cable even when the
water leak is dripping from a single small pin hole or crack...More
New Product: TT7000
TraceTek TT7000 sensing cable detects and locates concentrated sulfuric acid at any point along its length, yet does not reaxt to the presence of water. Installed with a TraceTek alarm and locating module, the cable senses the acid, triggers an alarm, and pinpoints...More
New Product: Fast Fuel Sensor
TraceTek Fast Fuel Sensor is a fast acting probe designed to detect hydrocarbon fuel floating on water, spreading on a flat surface or collecting in a sump. The probe ignores water, but detects a thin film of fuel floating...More
New Product: TT–iServer
The TraceTek iServer is the simplest, easiest, most economical way to connect TraceTek Sensor Interface Modules (TT–SIM) to an Ethernet network and the Internet. When you type its name in a Web Browser...More
New Product: TTSIM–2
The TTSIM–2 Sensor Interface Module monitors up to 150 meters (500 Feet) of Tracetek sensing cable. When liquid is detected, the TTSIM–2 unit indicates the leak, displays the location of the leak
and switches a relay to provide local voltage–free contact closure...More
New Product: TTA–SIM
The TTA–SIM has been designed for use with TraceTek sensing cables, point sensors and normally open, dry contact devices (float switch, pressure or vacuum switch, optical probe with adaptor, limit switch, etc.)
Up to 500 Feet (150 m) of sensor cable can be monitored by the TTA–SIM. When liquid is detected...More
|
|
|
